Brick slip EWI · Essex
Brick slip finish over insulation in Maldon
If you're planning brick slip finishes in Maldon, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Mixed finishes — brick slip below, render above — can suit semi-detached houses in Maldon.
- Free survey in CM9 and nearby
- Guide price from £185 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Maldon
Postcode, service and a phone number is all we need.
Included as standard
- Thin slips (typically 10–20mm) bonded to the system base coat
- Heavier than render, so more fixings are specified
- Can be matched to local brick colours and bonds
- Clay, concrete or flexible acrylic slips available
Local considerations in Maldon
We also cover Witham and Chelmsford, close to Maldon. Maldon is about 13 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On brick terraces in Maldon, slips can insulate the wall while keeping the street's look.
- Postcode district
- CM9
- County or area
- Essex
- Nation
- England
- Nearby
- Witham, Chelmsford, Rayleigh, Wickford
Planning and building control in England
Planning in Maldon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is the brick slip system built up?
Insulation boards are fixed as for any EWI, followed by a reinforced base coat. The slips are bonded with the system adhesive, spaced for joints, then pointed. Corners use L-shaped slips so the edge looks like a solid brick.
Brick slip finish over insulation prices in Maldon
| Item | Guide price | Notes |
|---|---|---|
| Brick slip EWI | £185–£260 per m²0% VAT | Excluding scaffold |
| Brick slip feature panels | £168–£265 per m²inc VAT | Plinths, bays, features |
| Matching samples | Provided at survey |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Brick slip EWI in Maldon: questions
Can I mix brick slips and render?
Yes. A brick plinth or ground floor with render above is a common combination.
Will brick slips match my neighbours' brick?
We source slips to get close in colour and texture and show samples beforehand, but an exact match to weathered brick isn't always possible.
Is a brick slip finish more expensive?
Yes — roughly £70–£120 per m² more than render, because of materials and slower installation.
Do you cover Maldon?
Yes — we survey and quote brick slip finishes in Maldon (CM9) and nearby Witham, Chelmsford and Rayleigh, with a fixed written price before any work starts.