Brick slip EWI · England
Brick slip finish over insulation in Lancashire
Get guide prices online, then a free survey and fixed quote for brick slip finishes in Lancashire, including Burnley and Blackburn. On brick terraces in Lancashire, slips can insulate the wall while keeping the street's look.
- Free survey and fixed written price
- Guide price from £185 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Lancashire
Tell us the postcode and what you need.
What you get
- Heavier than render, so more fixings are specified
- Corners formed with L-shaped slips for a convincing finish
- Thin slips (typically 10–20mm) bonded to the system base coat
- Can be matched to local brick colours and bonds
- Clay, concrete or flexible acrylic slips available
What we look for in Lancashire
The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Mixed finishes — brick slip below, render above — can suit semi-detached houses in Lancashire.
- Nation
- England
- Region
- North West
- Towns covered
- Preston, Burnley, Blackburn, Blackpool, Morecambe, Lancaster, Lytham St Annes, Skelmersdale…
- Guide price
- From £185 per m² + scaffold · 0% VAT
England: planning and regulations
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
How is the brick slip system built up?
Insulation boards are fixed as for any EWI, followed by a reinforced base coat. The slips are bonded with the system adhesive, spaced for joints, then pointed. Corners use L-shaped slips so the edge looks like a solid brick.
Brick slip finish over insulation prices in Lancashire
| Item | Guide price | Notes |
|---|---|---|
| Brick slip EWI | £185–£260 per m²0% VAT | Excluding scaffold |
| Brick slip feature panels | £168–£265 per m²inc VAT | Plinths, bays, features |
| Matching samples | Provided at survey |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Brick slip EWI in Lancashire: questions
Is a brick slip finish more expensive?
Yes — roughly £70–£120 per m² more than render, because of materials and slower installation.
Can I mix brick slips and render?
Yes. A brick plinth or ground floor with render above is a common combination.
Do brick slips fall off?
Not when installed to the system manufacturer's specification, with the right adhesive, fixings and pointing.
Do you cover all of Lancashire?
Yes. We survey and quote brick slip finishes across Lancashire, including Preston, Burnley, Blackburn, Blackpool, Morecambe.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.