Brick slip EWI · Worcestershire
Brick slip finish over insulation in Evesham
From Evesham to Stratford-upon-Avon, we price brick slip finishes after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Mixed finishes — brick slip below, render above — can suit semi-detached houses in Evesham.
- Free survey in WR11 and nearby
- Guide price from £185 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Evesham
Postcode, service and a phone number is all we need.
What the job covers
- Heavier than render, so more fixings are specified
- Clay, concrete or flexible acrylic slips available
- Thin slips (typically 10–20mm) bonded to the system base coat
- Helps meet 'similar appearance' planning conditions
Before we quote in Evesham
We also cover Stratford-upon-Avon and Worcester, close to Evesham. It's roughly 13 miles from Evesham to Worcester, the largest town in Worcestershire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Worcestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On brick terraces in Evesham, slips can insulate the wall while keeping the street's look.
- Postcode district
- WR11
- County or area
- Worcestershire
- Nation
- England
- Nearby
- Stratford-upon-Avon, Worcester, Cheltenham, Droitwich
Planning and building control in England
Planning in Evesham follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is the brick slip system built up?
Insulation boards are fixed as for any EWI, followed by a reinforced base coat. The slips are bonded with the system adhesive, spaced for joints, then pointed. Corners use L-shaped slips so the edge looks like a solid brick.
Brick slip finish over insulation prices in Evesham
| Item | Guide price | Notes |
|---|---|---|
| Brick slip EWI | £185–£260 per m²0% VAT | Excluding scaffold |
| Brick slip feature panels | £168–£265 per m²inc VAT | Plinths, bays, features |
| Matching samples | Provided at survey |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Brick slip EWI in Evesham: questions
Can I mix brick slips and render?
Yes. A brick plinth or ground floor with render above is a common combination.
Do brick slips fall off?
Not when installed to the system manufacturer's specification, with the right adhesive, fixings and pointing.
Is a brick slip finish more expensive?
Yes — roughly £70–£120 per m² more than render, because of materials and slower installation.
Do you cover Evesham?
Yes — we survey and quote brick slip finishes in Evesham (WR11) and nearby Stratford-upon-Avon, Worcester and Cheltenham, with a fixed written price before any work starts.