EPS insulation · Ayrshire
EPS external wall insulation in Kilmarnock
If you're planning EPS external wall insulation in Kilmarnock, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where eaves are shallow on a house in Kilmarnock, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in KA3 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Kilmarnock
Postcode, service and a phone number is all we need.
What the job covers
- Grey graphite EPS reaches a given U-value with a thinner board
- Light boards mean fewer fixings and a faster install
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
Local considerations in Kilmarnock
Surveys in Kilmarnock also cover the surrounding KA3 district and towns such as Irvine and Ayr. South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Ayrshire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
We compare EPS against mineral wool for each Kilmarnock enquiry rather than assuming one board suits every wall.
- Postcode district
- KA3
- County or area
- Ayrshire
- Nation
- Scotland
- Nearby
- Irvine, Ayr, Newton Mearns, Paisley
Planning and building control in Scotland
For Kilmarnock properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Scotland's building standards cover changes to external wall construction; we check whether your job in Kilmarnock needs a warrant.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Kilmarnock
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Kilmarnock: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Kilmarnock?
Yes — we survey and quote EPS external wall insulation in Kilmarnock (KA3) and nearby Irvine, Ayr and Newton Mearns, with a fixed written price before any work starts.