EPS insulation · Cambridgeshire
EPS external wall insulation in Wisbech
Homeowners and landlords in Wisbech can get a free survey and a fixed written quote for EPS external wall insulation, covering PE13 and the surrounding area. Where eaves are shallow on a house in Wisbech, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in PE13 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Wisbech
Postcode, service and a phone number is all we need.
What's included
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install
- Grey graphite EPS reaches a given U-value with a thinner board
- Easy to shape around bays, arches and reveals
Homes and walls in Wisbech
As well as Wisbech itself, we quote in March, King's Lynn and Spalding. It's roughly 18 miles from Wisbech to Peterborough, the largest town in Cambridgeshire. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Cambridgeshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Wisbech.
- Postcode district
- PE13
- County or area
- Cambridgeshire
- Nation
- England
- Nearby
- March, King's Lynn, Spalding, Peterborough
Approvals in England
Planning in Wisbech follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Wisbech
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Wisbech: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Wisbech?
Yes — we survey and quote EPS external wall insulation in Wisbech (PE13) and nearby March, King's Lynn and Spalding, with a fixed written price before any work starts.