Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Cheshire

EPS external wall insulation in Widnes

We quote EPS external wall insulation for homes in Widnes (WA8) and nearby Runcorn and Great Sankey, with guide prices online and a free survey to fix the price. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Widnes.

  • Free survey in WA8 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Widnes

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Used on low-rise houses; combustible, so not for taller buildings
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Light boards mean fewer fixings and a faster install
  • Finished in silicone, acrylic, mineral render or brick slip
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Widnes

Surveys in Widnes also cover the surrounding WA8 district and towns such as Runcorn and Great Sankey. It's roughly 7 miles from Widnes to Warrington, the largest town in Cheshire. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Cheshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Widnes, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
WA8
County or area
Cheshire
Nation
England
Nearby
Runcorn, Great Sankey, Prescot, Huyton

England: planning and regulations

For a house in Widnes, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Widnes

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Widnes: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Widnes?

Yes — we survey and quote EPS external wall insulation in Widnes (WA8) and nearby Runcorn, Great Sankey and Prescot, with a fixed written price before any work starts.

EPS insulation in Widnes

Send your postcode and we'll arrange a survey in Widnes.

Call freeGet a quote