EPS insulation · Northern Ireland
EPS external wall insulation in County Antrim
Homes and buildings across County Antrim — from Belfast to Newtownabbey — can get a free survey and written quote for EPS external wall insulation. We compare EPS against mineral wool for each County Antrim enquiry rather than assuming one board suits every wall.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for Northern Ireland
Free survey in County Antrim
Tell us the postcode and what you need.
Part of every quote
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Finished in silicone, acrylic, mineral render or brick slip
Local considerations in County Antrim
Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Parts of County Antrim fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Where eaves are shallow on a house in County Antrim, grey EPS can sometimes avoid the cost of extending the roofline.
- Nation
- Northern Ireland
- Region
- Northern Ireland
- Towns covered
- Belfast, Lisburn, Newtownabbey, Carrickfergus, Ballymena, Antrim, Larne
- Guide price
- From £105 per m² + scaffold · 0% VAT
Permissions in Northern Ireland
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. Changing the external appearance of a house may need permission, and conservation areas, flats, commercial buildings and listed buildings need planning permission or listed building consent. Check with your council's planning office.
Insulating external walls is building work under the Building Regulations (Northern Ireland) 2012, handled by council building control, with Technical Booklet F1 covering conservation of fuel and power in dwellings.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in County Antrim
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in County Antrim: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover all of County Antrim?
Yes. We survey and quote EPS external wall insulation across County Antrim, including Belfast, Lisburn, Newtownabbey, Carrickfergus, Ballymena.
Do I need planning permission in Northern Ireland?
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. We check your address before quoting.