EPS insulation · County Armagh
EPS external wall insulation in Armagh
We quote EPS external wall insulation for homes in Armagh (BT61) and nearby Portadown and Dungannon, with guide prices online and a free survey to fix the price. We compare EPS against mineral wool for each Armagh enquiry rather than assuming one board suits every wall.
- Free survey in BT61 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Armagh
Postcode, service and a phone number is all we need.
What's included
- Grey graphite EPS reaches a given U-value with a thinner board
- Used on low-rise houses; combustible, so not for taller buildings
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Light boards mean fewer fixings and a faster install
Local considerations in Armagh
Surveys in Armagh also cover the surrounding BT61 district and towns such as Portadown and Dungannon. Armagh sits around 13 miles from Craigavon. Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Exposure to wind-driven rain varies across County Armagh: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Armagh, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- BT61
- County or area
- County Armagh
- Nation
- Northern Ireland
- Nearby
- Portadown, Dungannon, Craigavon, Lurgan
Permissions in Northern Ireland
For Armagh homes, the council's planning office has the final say on external changes; conservation areas, flats and listed buildings need an application or consent.
Council building control in Northern Ireland checks insulation work of this kind; the quote says how the application is handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Armagh
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Armagh: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Armagh?
Yes — we survey and quote EPS external wall insulation in Armagh (BT61) and nearby Portadown, Dungannon and Craigavon, with a fixed written price before any work starts.