Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · County Fermanagh

EPS external wall insulation in Irvinestown

From Irvinestown to Enniskillen, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Irvinestown.

  • Free survey in BT94 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Irvinestown

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Irvinestown

We also cover Enniskillen and Omagh, close to Irvinestown. Irvinestown sits around 9 miles from Enniskillen. Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.

Parts of County Fermanagh fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

Where eaves are shallow on a house in Irvinestown, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
BT94
County or area
County Fermanagh
Nation
Northern Ireland
Nearby
Enniskillen, Omagh, Lisnaskea, Strabane

Permissions in Northern Ireland

In Northern Ireland, permitted development is set by the 2015 Order; in Irvinestown, changing a house's external appearance, and any work on flats or listed buildings, may need permission, so we check with the council.

Council building control in Northern Ireland checks insulation work of this kind; the quote says how the application is handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Irvinestown

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Irvinestown: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Irvinestown?

Yes — we survey and quote EPS external wall insulation in Irvinestown (BT94) and nearby Enniskillen, Omagh and Lisnaskea, with a fixed written price before any work starts.

EPS insulation in Irvinestown

Get a free survey and fixed written price for EPS external wall insulation in Irvinestown.

Call freeGet a quote