EPS insulation · Scotland
EPS external wall insulation in Dumfries and Galloway
EPS external wall insulation across Dumfries and Galloway: measured survey, clear specification and a fixed written price before any work starts. We compare EPS against mineral wool for each Dumfries and Galloway enquiry rather than assuming one board suits every wall.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for Scotland
Free survey in Dumfries and Galloway
Tell us the postcode and what you need.
Included as standard
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Light boards mean fewer fixings and a faster install
Before we quote in Dumfries and Galloway
South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Dumfries and Galloway fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Dumfries and Galloway.
- Nation
- Scotland
- Region
- South West Scotland
- Towns covered
- Dumfries, Stranraer, Annan
- Guide price
- From £105 per m² + scaffold · 0% VAT
Approvals in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Dumfries and Galloway
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Dumfries and Galloway: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover all of Dumfries and Galloway?
Yes. We survey and quote EPS external wall insulation across Dumfries and Galloway, including Dumfries, Stranraer, Annan.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.