Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · East Riding of Yorkshire

EPS external wall insulation in Bridlington

From Bridlington to Scarborough, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Bridlington.

  • Free survey in YO16 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bridlington

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Used on low-rise houses; combustible, so not for taller buildings
  • Light boards mean fewer fixings and a faster install
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Bridlington

We cover Bridlington and nearby Scarborough, Beverley and Hull. Bridlington is about 24 miles from Hull. Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.

Much of East Riding of Yorkshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Where eaves are shallow on a house in Bridlington, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
YO16
County or area
East Riding of Yorkshire
Nation
England
Nearby
Scarborough, Beverley, Hull, Grimsby

Permissions in England

Planning in Bridlington follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Bridlington

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Bridlington: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Bridlington?

Yes — we survey and quote EPS external wall insulation in Bridlington (YO16) and nearby Scarborough, Beverley and Hull, with a fixed written price before any work starts.

EPS insulation in Bridlington

Get a free survey and fixed written price for EPS external wall insulation in Bridlington.

Call freeGet a quote