Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Essex

EPS external wall insulation in Clacton-on-Sea

Homeowners and landlords in Clacton-on-Sea can get a free survey and a fixed written quote for EPS external wall insulation, covering CO15 and the surrounding area. We compare EPS against mineral wool for each Clacton-on-Sea enquiry rather than assuming one board suits every wall.

  • Free survey in CO15 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Clacton-on-Sea

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Used on low-rise houses; combustible, so not for taller buildings
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Local considerations in Clacton-on-Sea

We cover Clacton-on-Sea and nearby Harwich, Colchester and Felixstowe. Clacton-on-Sea sits around 26 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.

Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Where eaves are shallow on a house in Clacton-on-Sea, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
CO15
County or area
Essex
Nation
England
Nearby
Harwich, Colchester, Felixstowe, Ipswich

England: planning and regulations

Planning in Clacton-on-Sea follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Clacton-on-Sea

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Clacton-on-Sea: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Clacton-on-Sea?

Yes — we survey and quote EPS external wall insulation in Clacton-on-Sea (CO15) and nearby Harwich, Colchester and Felixstowe, with a fixed written price before any work starts.

EPS insulation in Clacton-on-Sea

Book a free survey in Clacton-on-Sea — no obligation.

Call freeGet a quote