Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Greater Glasgow

EPS external wall insulation in Bearsden

Looking for EPS external wall insulation in Bearsden? We survey homes across Bearsden and the G61 area, then give you a fixed written price before any work starts. We compare EPS against mineral wool for each Bearsden enquiry rather than assuming one board suits every wall.

  • Free survey in G61 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bearsden

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Finished in silicone, acrylic, mineral render or brick slip
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Bearsden

Surveys in Bearsden also cover the surrounding G61 district and towns such as Clydebank and Renfrew. It's roughly 5 miles from Bearsden to Glasgow, the largest town in Greater Glasgow. West Central Scotland has sandstone tenements, interwar and post-war council housing including no-fines and other system-built types, and many harled (roughcast) houses.

Parts of Greater Glasgow fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Bearsden.

Postcode district
G61
County or area
Greater Glasgow
Nation
Scotland
Nearby
Clydebank, Renfrew, Bishopbriggs, Glasgow

Scotland: planning and regulations

For Bearsden properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.

Where a building warrant is needed for Bearsden work, it's obtained before installation starts, and the quote says who arranges it.

When is EPS the right choice?

EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.

EPS external wall insulation prices in Bearsden

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Bearsden: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Bearsden?

Yes — we survey and quote EPS external wall insulation in Bearsden (G61) and nearby Clydebank, Renfrew and Bishopbriggs, with a fixed written price before any work starts.

EPS insulation in Bearsden

Get a free survey and fixed written price for EPS external wall insulation in Bearsden.

Call freeGet a quote