Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Greater London

EPS external wall insulation in Willesden

Homeowners and landlords in Willesden can get a free survey and a fixed written quote for EPS external wall insulation, covering NW10 and the surrounding area. EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Willesden.

  • Free survey in NW10 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Willesden

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Light boards mean fewer fixings and a faster install
  • Finished in silicone, acrylic, mineral render or brick slip
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Used on low-rise houses; combustible, so not for taller buildings
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Local considerations in Willesden

As well as Willesden itself, we quote in Cricklewood, Shepherds Bush and Kilburn. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Where eaves are shallow on a house in Willesden, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
NW10
County or area
Greater London
Nation
England
Nearby
Cricklewood, Shepherds Bush, Kilburn, Acton

Approvals in England

Before quoting in Willesden, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Willesden

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Willesden: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Do you cover Willesden?

Yes — we survey and quote EPS external wall insulation in Willesden (NW10) and nearby Cricklewood, Shepherds Bush and Kilburn, with a fixed written price before any work starts.

EPS insulation in Willesden

Send your postcode and we'll arrange a survey in Willesden.

Call freeGet a quote