EPS insulation · Greater Manchester
EPS external wall insulation in Altrincham
If you're planning EPS external wall insulation in Altrincham, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where eaves are shallow on a house in Altrincham, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in WA14 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Altrincham
Postcode, service and a phone number is all we need.
What the job covers
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Grey graphite EPS reaches a given U-value with a thinner board
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install

What we look for in Altrincham
We cover Altrincham and nearby Sale, Urmston and Stretford. Altrincham is about 8 miles from Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Altrincham enquiry rather than assuming one board suits every wall.
- Postcode district
- WA14
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Sale, Urmston, Stretford, Wilmslow
England: planning and regulations
Before quoting in Altrincham, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Altrincham
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Altrincham: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Altrincham?
Yes — we survey and quote EPS external wall insulation in Altrincham (WA14) and nearby Sale, Urmston and Stretford, with a fixed written price before any work starts.