Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Greater Manchester

EPS external wall insulation in Atherton

Looking for EPS external wall insulation in Atherton? We survey homes across Atherton and the M46 area, then give you a fixed written price before any work starts. Where eaves are shallow on a house in Atherton, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in M46 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Atherton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Light boards mean fewer fixings and a faster install
  • Used on low-rise houses; combustible, so not for taller buildings
  • Easy to shape around bays, arches and reveals
  • Grey graphite EPS reaches a given U-value with a thinner board
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Atherton: walls, weather and approvals

As well as Atherton itself, we quote in Tyldesley, Westhoughton and Leigh. Atherton sits around 11 miles from Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Atherton.

Postcode district
M46
County or area
Greater Manchester
Nation
England
Nearby
Tyldesley, Westhoughton, Leigh, Hindley

Permissions in England

For a house in Atherton, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Atherton

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Atherton: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Do you cover Atherton?

Yes — we survey and quote EPS external wall insulation in Atherton (M46) and nearby Tyldesley, Westhoughton and Leigh, with a fixed written price before any work starts.

EPS insulation in Atherton

Send your postcode and we'll arrange a survey in Atherton.

Call freeGet a quote