Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Greater Manchester

EPS external wall insulation in Middleton

Looking for EPS external wall insulation in Middleton? We survey homes across Middleton and the M24 area, then give you a fixed written price before any work starts. We compare EPS against mineral wool for each Middleton enquiry rather than assuming one board suits every wall.

  • Free survey in M24 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Middleton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Middleton

We also cover Heywood and Royton, close to Middleton. It's roughly 5 miles from Middleton to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Middleton, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
M24
County or area
Greater Manchester
Nation
England
Nearby
Heywood, Royton, Oldham, Failsworth

Permissions in England

Before quoting in Middleton, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Middleton

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Middleton: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Middleton?

Yes — we survey and quote EPS external wall insulation in Middleton (M24) and nearby Heywood, Royton and Oldham, with a fixed written price before any work starts.

EPS insulation in Middleton

Start with a guide price, then fix it with a free survey in Middleton.

Call freeGet a quote