EPS insulation · Greater Manchester
EPS external wall insulation in Stalybridge
If you're planning EPS external wall insulation in Stalybridge, start with a free survey: we measure, check the walls and confirm planning and building control for your address. We compare EPS against mineral wool for each Stalybridge enquiry rather than assuming one board suits every wall.
- Free survey in SK15 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Stalybridge
Postcode, service and a phone number is all we need.
What you get
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Grey graphite EPS reaches a given U-value with a thinner board
What we look for in Stalybridge
We also cover Ashton-under-Lyne and Hyde, close to Stalybridge. Stalybridge is about 7 miles from Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Stalybridge, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- SK15
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Ashton-under-Lyne, Hyde, Denton, Droylsden
Permissions in England
Before quoting in Stalybridge, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Stalybridge
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Stalybridge: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Stalybridge?
Yes — we survey and quote EPS external wall insulation in Stalybridge (SK15) and nearby Ashton-under-Lyne, Hyde and Denton, with a fixed written price before any work starts.