Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Gwent

EPS external wall insulation in Risca

If you're planning EPS external wall insulation in Risca, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where eaves are shallow on a house in Risca, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in NP11 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Risca

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
  • Used on low-rise houses; combustible, so not for taller buildings
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Risca

Surveys in Risca also cover the surrounding NP11 district and towns such as Newport (Gwent) and Cwmbran. Risca is about 5 miles from Newport (Gwent). South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.

Exposure to wind-driven rain varies across Gwent: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We compare EPS against mineral wool for each Risca enquiry rather than assuming one board suits every wall.

Postcode district
NP11
County or area
Gwent
Nation
Wales
Nearby
Newport (Gwent), Cwmbran, Caerphilly, Pontypool

Permissions in Wales

For homes in Risca, the local planning authority decides any borderline cases; changing a brick house to render, or work on flats, usually needs an application in Wales.

In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Risca

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Risca: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Risca?

Yes — we survey and quote EPS external wall insulation in Risca (NP11) and nearby Newport (Gwent), Cwmbran and Caerphilly, with a fixed written price before any work starts.

EPS insulation in Risca

Send your postcode and we'll arrange a survey in Risca.

Call freeGet a quote