Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Hertfordshire

EPS external wall insulation in Hatfield

Homeowners and landlords in Hatfield can get a free survey and a fixed written quote for EPS external wall insulation, covering AL10 and the surrounding area. Where eaves are shallow on a house in Hatfield, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in AL10 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Hatfield

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Easy to shape around bays, arches and reveals
  • Used on low-rise houses; combustible, so not for taller buildings
  • Grey graphite EPS reaches a given U-value with a thinner board
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Hatfield: walls, weather and approvals

As well as Hatfield itself, we quote in Welwyn Garden City, St Albans and Potters Bar. It's roughly 10 miles from Hatfield to Watford, the largest town in Hertfordshire. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.

Much of Hertfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

We compare EPS against mineral wool for each Hatfield enquiry rather than assuming one board suits every wall.

Postcode district
AL10
County or area
Hertfordshire
Nation
England
Nearby
Welwyn Garden City, St Albans, Potters Bar, Hertford

Permissions in England

For a house in Hatfield, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Hatfield

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Hatfield: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Hatfield?

Yes — we survey and quote EPS external wall insulation in Hatfield (AL10) and nearby Welwyn Garden City, St Albans and Potters Bar, with a fixed written price before any work starts.

EPS insulation in Hatfield

Start with a guide price, then fix it with a free survey in Hatfield.

Call freeGet a quote