Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Kent

EPS external wall insulation in Margate

We quote EPS external wall insulation for homes in Margate (CT9) and nearby Broadstairs and Ramsgate, with guide prices online and a free survey to fix the price. We compare EPS against mineral wool for each Margate enquiry rather than assuming one board suits every wall.

  • Free survey in CT9 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Margate

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Light boards mean fewer fixings and a faster install
  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Margate

Surveys in Margate also cover the surrounding CT9 district and towns such as Broadstairs and Ramsgate. Margate sits around 38 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Margate.

Postcode district
CT9
County or area
Kent
Nation
England
Nearby
Broadstairs, Ramsgate, Deal, Herne Bay

Permissions in England

Planning in Margate follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Margate

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Margate: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Do you cover Margate?

Yes — we survey and quote EPS external wall insulation in Margate (CT9) and nearby Broadstairs, Ramsgate and Deal, with a fixed written price before any work starts.

EPS insulation in Margate

Get a free survey and fixed written price for EPS external wall insulation in Margate.

Call freeGet a quote