Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Lanarkshire

EPS external wall insulation in Bellshill

Quotes for EPS external wall insulation in Bellshill list the system, the detailing and the VAT position in writing, so you know exactly what's included. We compare EPS against mineral wool for each Bellshill enquiry rather than assuming one board suits every wall.

  • Free survey in ML4 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bellshill

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Light boards mean fewer fixings and a faster install
  • Used on low-rise houses; combustible, so not for taller buildings
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Bellshill

Surveys in Bellshill also cover the surrounding ML4 district and towns such as Motherwell and Coatbridge. It's roughly 7 miles from Bellshill to East Kilbride, the largest town in Lanarkshire. West Central Scotland has sandstone tenements, interwar and post-war council housing including no-fines and other system-built types, and many harled (roughcast) houses.

Exposure to wind-driven rain varies across Lanarkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Bellshill.

Postcode district
ML4
County or area
Lanarkshire
Nation
Scotland
Nearby
Motherwell, Coatbridge, Hamilton, Airdrie

Planning and building control in Scotland

Scottish householder rules mean many Bellshill jobs that change the outside of a house need a planning application; we confirm the position before quoting.

Scotland's building standards cover changes to external wall construction; we check whether your job in Bellshill needs a warrant.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Bellshill

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Bellshill: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Do you cover Bellshill?

Yes — we survey and quote EPS external wall insulation in Bellshill (ML4) and nearby Motherwell, Coatbridge and Hamilton, with a fixed written price before any work starts.

EPS insulation in Bellshill

Send your postcode and we'll arrange a survey in Bellshill.

Call freeGet a quote