Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Merseyside

EPS external wall insulation in Newton-le-Willows

From Newton-le-Willows to Golborne, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Where eaves are shallow on a house in Newton-le-Willows, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in WA12 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Newton-le-Willows

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Light boards mean fewer fixings and a faster install
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Used on low-rise houses; combustible, so not for taller buildings
  • Finished in silicone, acrylic, mineral render or brick slip
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Local considerations in Newton-le-Willows

We also cover Golborne and Ashton-in-Makerfield, close to Newton-le-Willows. Newton-le-Willows is about 16 miles from Liverpool. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Merseyside: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We compare EPS against mineral wool for each Newton-le-Willows enquiry rather than assuming one board suits every wall.

Postcode district
WA12
County or area
Merseyside
Nation
England
Nearby
Golborne, Ashton-in-Makerfield, Warrington, Great Sankey

Planning and building control in England

Planning in Newton-le-Willows follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Newton-le-Willows

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Newton-le-Willows: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Newton-le-Willows?

Yes — we survey and quote EPS external wall insulation in Newton-le-Willows (WA12) and nearby Golborne, Ashton-in-Makerfield and Warrington, with a fixed written price before any work starts.

EPS insulation in Newton-le-Willows

Book a free survey in Newton-le-Willows — no obligation.

Call freeGet a quote