EPS insulation · Merseyside
EPS external wall insulation in Wallasey
Need EPS external wall insulation in Wallasey? Tell us about the property and we'll arrange a free survey and a written quote. We compare EPS against mineral wool for each Wallasey enquiry rather than assuming one board suits every wall.
- Free survey in CH44 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Wallasey
Postcode, service and a phone number is all we need.
Part of every quote
- Light boards mean fewer fixings and a faster install
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
Wallasey: walls, weather and approvals
As well as Wallasey itself, we quote in Birkenhead, Bootle and Liverpool. It's roughly 4 miles from Wallasey to Liverpool, the largest town in Merseyside. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Merseyside: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Wallasey.
- Postcode district
- CH44
- County or area
- Merseyside
- Nation
- England
- Nearby
- Birkenhead, Bootle, Liverpool, Crosby
Approvals in England
For a house in Wallasey, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Wallasey
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Wallasey: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Wallasey?
Yes — we survey and quote EPS external wall insulation in Wallasey (CH44) and nearby Birkenhead, Bootle and Liverpool, with a fixed written price before any work starts.