EPS insulation · England
EPS external wall insulation in Norfolk
Get guide prices online, then a free survey and fixed quote for EPS external wall insulation in Norfolk, including Great Yarmouth and King's Lynn. Where eaves are shallow on a house in Norfolk, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Norfolk
Tell us the postcode and what you need.
Included as standard
- Used on low-rise houses; combustible, so not for taller buildings
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Grey graphite EPS reaches a given U-value with a thinner board
- Light boards mean fewer fixings and a faster install
- Finished in silicone, acrylic, mineral render or brick slip
Norfolk: walls, weather and approvals
The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Norfolk sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Norfolk.
- Nation
- England
- Region
- East of England
- Towns covered
- Norwich, Great Yarmouth, King's Lynn, Thetford, Dereham
- Guide price
- From £105 per m² + scaffold · 0% VAT
Planning and building control in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Norfolk
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Norfolk: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover all of Norfolk?
Yes. We survey and quote EPS external wall insulation across Norfolk, including Norwich, Great Yarmouth, King's Lynn, Thetford, Dereham.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.