EPS insulation · England
EPS external wall insulation in North Yorkshire
Get guide prices online, then a free survey and fixed quote for EPS external wall insulation in North Yorkshire, including Middlesbrough and Harrogate. We compare EPS against mineral wool for each North Yorkshire enquiry rather than assuming one board suits every wall.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in North Yorkshire
Tell us the postcode and what you need.
What you get
- Used on low-rise houses; combustible, so not for taller buildings
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Easy to shape around bays, arches and reveals
- Grey graphite EPS reaches a given U-value with a thinner board
- Light boards mean fewer fixings and a faster install
North Yorkshire: walls, weather and approvals
Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across North Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in North Yorkshire.
- Nation
- England
- Region
- Yorkshire and the Humber
- Towns covered
- York, Middlesbrough, Harrogate, Scarborough, Redcar, Selby, Thornaby-on-Tees
- Guide price
- From £105 per m² + scaffold · 0% VAT
Approvals in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in North Yorkshire
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in North Yorkshire: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover all of North Yorkshire?
Yes. We survey and quote EPS external wall insulation across North Yorkshire, including York, Middlesbrough, Harrogate, Scarborough, Redcar.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.