Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Nottinghamshire

EPS external wall insulation in Kirkby-in-Ashfield

From Kirkby-in-Ashfield to Sutton-in-Ashfield, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. We compare EPS against mineral wool for each Kirkby-in-Ashfield enquiry rather than assuming one board suits every wall.

  • Free survey in NG17 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Kirkby-in-Ashfield

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Finished in silicone, acrylic, mineral render or brick slip
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Kirkby-in-Ashfield

Surveys in Kirkby-in-Ashfield also cover the surrounding NG17 district and towns such as Sutton-in-Ashfield and Mansfield. It's roughly 11 miles from Kirkby-in-Ashfield to Nottingham, the largest town in Nottinghamshire. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.

Much of Nottinghamshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Where eaves are shallow on a house in Kirkby-in-Ashfield, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
NG17
County or area
Nottinghamshire
Nation
England
Nearby
Sutton-in-Ashfield, Mansfield, Hucknall, Alfreton

Planning and building control in England

Before quoting in Kirkby-in-Ashfield, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Kirkby-in-Ashfield

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Kirkby-in-Ashfield: questions

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Kirkby-in-Ashfield?

Yes — we survey and quote EPS external wall insulation in Kirkby-in-Ashfield (NG17) and nearby Sutton-in-Ashfield, Mansfield and Hucknall, with a fixed written price before any work starts.

EPS insulation in Kirkby-in-Ashfield

Start with a guide price, then fix it with a free survey in Kirkby-in-Ashfield.

Call freeGet a quote