EPS insulation · England
EPS external wall insulation in Oxfordshire
We provide EPS external wall insulation across Oxfordshire, including Oxford, Banbury and Abingdon, with a free survey and fixed written price. Where eaves are shallow on a house in Oxfordshire, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Oxfordshire
Tell us the postcode and what you need.
Included as standard
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Finished in silicone, acrylic, mineral render or brick slip
- Easy to shape around bays, arches and reveals
- Grey graphite EPS reaches a given U-value with a thinner board
- Light boards mean fewer fixings and a faster install
Before we quote in Oxfordshire
Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Oxfordshire.
- Nation
- England
- Region
- South East
- Towns covered
- Oxford, Banbury, Abingdon, Bicester, Didcot, Witney
- Guide price
- From £105 per m² + scaffold · 0% VAT
England: planning and regulations
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Oxfordshire
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Oxfordshire: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover all of Oxfordshire?
Yes. We survey and quote EPS external wall insulation across Oxfordshire, including Oxford, Banbury, Abingdon, Bicester, Didcot.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.