EPS insulation · Surrey
EPS external wall insulation in Epsom
Looking for EPS external wall insulation in Epsom? We survey homes across Epsom and the KT17 area, then give you a fixed written price before any work starts. Where eaves are shallow on a house in Epsom, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in KT17 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Epsom
Postcode, service and a phone number is all we need.
What you get
- Grey graphite EPS reaches a given U-value with a thinner board
- Finished in silicone, acrylic, mineral render or brick slip
- Light boards mean fewer fixings and a faster install
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
What we look for in Epsom
Surveys in Epsom also cover the surrounding KT17 district and towns such as Banstead and Sutton. Epsom sits around 12 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
We compare EPS against mineral wool for each Epsom enquiry rather than assuming one board suits every wall.
- Postcode district
- KT17
- County or area
- Surrey
- Nation
- England
- Nearby
- Banstead, Sutton, Leatherhead, Surbiton
Permissions in England
Before quoting in Epsom, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Epsom
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Epsom: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Epsom?
Yes — we survey and quote EPS external wall insulation in Epsom (KT17) and nearby Banstead, Sutton and Leatherhead, with a fixed written price before any work starts.