Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Surrey

EPS external wall insulation in Reigate

EPS external wall insulation in Reigate: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. We compare EPS against mineral wool for each Reigate enquiry rather than assuming one board suits every wall.

  • Free survey in RH2 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Reigate

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Grey graphite EPS reaches a given U-value with a thinner board
  • Finished in silicone, acrylic, mineral render or brick slip
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

What we look for in Reigate

As well as Reigate itself, we quote in Redhill, Horley and Banstead. Reigate sits around 16 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Reigate.

Postcode district
RH2
County or area
Surrey
Nation
England
Nearby
Redhill, Horley, Banstead, Caterham

Permissions in England

For a house in Reigate, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

When is EPS the right choice?

EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.

EPS external wall insulation prices in Reigate

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in Reigate: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Reigate?

Yes — we survey and quote EPS external wall insulation in Reigate (RH2) and nearby Redhill, Horley and Banstead, with a fixed written price before any work starts.

EPS insulation in Reigate

Book a free survey in Reigate — no obligation.

Call freeGet a quote