EPS insulation · Tyne and Wear
EPS external wall insulation in Newburn
We quote EPS external wall insulation for homes in Newburn (NE15) and nearby Gosforth and Newcastle upon Tyne, with guide prices online and a free survey to fix the price. Where eaves are shallow on a house in Newburn, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in NE15 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Newburn
Postcode, service and a phone number is all we need.
Included as standard
- Finished in silicone, acrylic, mineral render or brick slip
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
Homes and walls in Newburn
As well as Newburn itself, we quote in Gosforth, Newcastle upon Tyne and Gateshead. Newburn is about 5 miles from Newcastle upon Tyne. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Newburn enquiry rather than assuming one board suits every wall.
- Postcode district
- NE15
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- Gosforth, Newcastle upon Tyne, Gateshead, Felling
England: planning and regulations
Planning in Newburn follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Newburn
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Newburn: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Do you cover Newburn?
Yes — we survey and quote EPS external wall insulation in Newburn (NE15) and nearby Gosforth, Newcastle upon Tyne and Gateshead, with a fixed written price before any work starts.