Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Tyne and Wear

EPS external wall insulation in Whitley Bay

From Whitley Bay to North Shields, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Where eaves are shallow on a house in Whitley Bay, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in NE26 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Whitley Bay

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Easy to shape around bays, arches and reveals
  • Used on low-rise houses; combustible, so not for taller buildings
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Light boards mean fewer fixings and a faster install
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Whitley Bay

Surveys in Whitley Bay also cover the surrounding NE26 district and towns such as North Shields and South Shields. It's roughly 8 miles from Whitley Bay to Newcastle upon Tyne, the largest town in Tyne and Wear. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Whitley Bay.

Postcode district
NE26
County or area
Tyne and Wear
Nation
England
Nearby
North Shields, South Shields, Jarrow, Wallsend

Permissions in England

Planning in Whitley Bay follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Whitley Bay

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Whitley Bay: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Whitley Bay?

Yes — we survey and quote EPS external wall insulation in Whitley Bay (NE26) and nearby North Shields, South Shields and Jarrow, with a fixed written price before any work starts.

EPS insulation in Whitley Bay

Get a free survey and fixed written price for EPS external wall insulation in Whitley Bay.

Call freeGet a quote