Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Warwickshire

EPS external wall insulation in Kenilworth

From Kenilworth to Warwick, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Where eaves are shallow on a house in Kenilworth, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in CV8 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Kenilworth

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Light boards mean fewer fixings and a faster install
  • Finished in silicone, acrylic, mineral render or brick slip
  • Used on low-rise houses; combustible, so not for taller buildings
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Before we quote in Kenilworth

Surveys in Kenilworth also cover the surrounding CV8 district and towns such as Warwick and Coventry. Kenilworth is about 5 miles from Leamington Spa. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.

Much of Warwickshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Kenilworth.

Postcode district
CV8
County or area
Warwickshire
Nation
England
Nearby
Warwick, Coventry, Leamington Spa, Solihull

England: planning and regulations

Before quoting in Kenilworth, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Kenilworth

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Kenilworth: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Kenilworth?

Yes — we survey and quote EPS external wall insulation in Kenilworth (CV8) and nearby Warwick, Coventry and Leamington Spa, with a fixed written price before any work starts.

EPS insulation in Kenilworth

Book a free survey in Kenilworth — no obligation.

Call freeGet a quote