Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · West Sussex

EPS external wall insulation in East Grinstead

If you're planning EPS external wall insulation in East Grinstead, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where eaves are shallow on a house in East Grinstead, grey EPS can sometimes avoid the cost of extending the roofline.

  • Free survey in RH19 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in East Grinstead

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Finished in silicone, acrylic, mineral render or brick slip
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Easy to shape around bays, arches and reveals
  • Grey graphite EPS reaches a given U-value with a thinner board
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Local considerations in East Grinstead

We also cover Horley and Crawley, close to East Grinstead. East Grinstead sits around 8 miles from Crawley. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across West Sussex: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in East Grinstead.

Postcode district
RH19
County or area
West Sussex
Nation
England
Nearby
Horley, Crawley, Crowborough, Haywards Heath

Approvals in England

Planning in East Grinstead follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

When is EPS the right choice?

EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.

EPS external wall insulation prices in East Grinstead

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

EPS insulation in East Grinstead: questions

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover East Grinstead?

Yes — we survey and quote EPS external wall insulation in East Grinstead (RH19) and nearby Horley, Crawley and Crowborough, with a fixed written price before any work starts.

EPS insulation in East Grinstead

Start with a guide price, then fix it with a free survey in East Grinstead.

Call freeGet a quote