Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Wiltshire

EPS external wall insulation in Trowbridge

Homeowners and landlords in Trowbridge can get a free survey and a fixed written quote for EPS external wall insulation, covering BA14 and the surrounding area. We compare EPS against mineral wool for each Trowbridge enquiry rather than assuming one board suits every wall.

  • Free survey in BA14 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Trowbridge

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Light boards mean fewer fixings and a faster install
  • Thermal conductivity around 0.031–0.038 W/mK depending on grade
  • Used on low-rise houses; combustible, so not for taller buildings
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Trowbridge: walls, weather and approvals

As well as Trowbridge itself, we quote in Bath, Frome and Chippenham. Trowbridge is about 25 miles from Swindon. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Wiltshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Trowbridge.

Postcode district
BA14
County or area
Wiltshire
Nation
England
Nearby
Bath, Frome, Chippenham, Kingswood

Approvals in England

Planning in Trowbridge follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

How thick does the board need to be?

On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.

EPS external wall insulation prices in Trowbridge

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

EPS insulation in Trowbridge: questions

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Will woodpeckers damage EPS?

It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

Do you cover Trowbridge?

Yes — we survey and quote EPS external wall insulation in Trowbridge (BA14) and nearby Bath, Frome and Chippenham, with a fixed written price before any work starts.

EPS insulation in Trowbridge

Send your postcode and we'll arrange a survey in Trowbridge.

Call freeGet a quote