Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Flats and blocks · Greater London

EWI for flats and blocks in Romford

Quotes for EWI for flats and blocks in Romford list the system, the detailing and the VAT position in writing, so you know exactly what's included. On mixed-tenure blocks in Romford, we agree access and resident notices with the managing agent before scaffold goes up.

  • Free survey in RM1 and nearby
  • Guide price from £110 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Romford

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • We work with managing agents on resident communication
  • One programme and one finish across the whole building
  • Planning permission is needed for flats and maisonettes
  • Mineral wool systems where building height or guidance requires them
A five-storey block of flats half re-clad in white and grey insulated render, with scaffolding on the brick half

Local considerations in Romford

We cover Romford and nearby Hornchurch, Dagenham and Becontree. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For blocks in Romford, we start with height, storeys and the planning position, because those decide the system.

Postcode district
RM1
County or area
Greater London
Nation
England
Nearby
Hornchurch, Dagenham, Becontree, Ilford

England: planning and regulations

For a house in Romford, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Who needs to agree to EWI on a block?

The freeholder or management company commissions the work, but leaseholders usually pay through the service charge. In England and Wales, major works above the statutory threshold trigger the Section 20 consultation process before a contract is placed. We provide the specification and pricing you need for that consultation.

EWI for flats and blocks prices in Romford

EWI for flats and blocks guide prices
ItemGuide priceNotes
Mineral wool system on a low-rise block£110–£190 per m²0% VATPriced on survey
Scaffold and accessPriced per buildingIncludes licences where needed
Specification and pricing pack for consultationIncluded with quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Flats and blocks in Romford: questions

Do you work on high-rise buildings?

Tell us the height and number of storeys. Buildings in the higher-risk category have a separate regulatory route, and we'll say plainly if we're not the right contractor.

Who pays for EWI on a leasehold block?

In England and Wales, usually the leaseholders through the service charge, depending on the lease, and the landlord must follow the Section 20 consultation process for major works.

Can one flat have external wall insulation on its own?

Rarely. The outside walls are usually owned by the freeholder, the result would look patchy, and planning is unlikely. Whole-building schemes are the norm.

Do you cover Romford?

Yes — we survey and quote EWI for flats and blocks in Romford (RM1) and nearby Hornchurch, Dagenham and Becontree, with a fixed written price before any work starts.

Flats and blocks in Romford

Start with a guide price, then fix it with a free survey in Romford.

Call freeGet a quote