Flats and blocks · England
EWI for flats and blocks in Hertfordshire
Quotes for EWI for flats and blocks in Hertfordshire set out the system, detailing, access and VAT position in writing. For blocks in Hertfordshire, we start with height, storeys and the planning position, because those decide the system.
- Free survey and fixed written price
- Guide price from £110 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Hertfordshire
Tell us the postcode and what you need.
Part of every quote
- Cavity barriers and fire-stopping detailed at compartment floors
- We work with managing agents on resident communication
- Higher-risk buildings follow the Building Safety Regulator's process in England
- Planning permission is needed for flats and maisonettes
- One programme and one finish across the whole building
Homes and walls in Hertfordshire
The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Hertfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Freeholders and managing agents in Hertfordshire get a written specification and pricing they can share with owners.
- Nation
- England
- Region
- East of England
- Towns covered
- Watford, Stevenage, Hemel Hempstead, St Albans, Welwyn Garden City, Cheshunt, Letchworth Garden City, Hatfield…
- Guide price
- From £110 per m² + scaffold · 0% VAT
Permissions in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
Combustible materials are banned in the external walls of relevant buildings 18 metres and over (regulation 7(2)), and Approved Document B guidance also covers residential buildings with a storey 11 metres or more above ground. Higher-risk buildings go through the Building Safety Regulator.
How disruptive is it for residents?
Most work happens from scaffolding outside. Residents may need to allow brief access to extend window cills, vents or flues from the inside. We provide a notice for residents covering dates, scaffold, and how to raise concerns.
EWI for flats and blocks prices in Hertfordshire
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool system on a low-rise block | £110–£190 per m²0% VAT | Priced on survey |
| Scaffold and access | Priced per building | Includes licences where needed |
| Specification and pricing pack for consultation | Included with quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Flats and blocks in Hertfordshire: questions
Do you work on high-rise buildings?
Tell us the height and number of storeys. Buildings in the higher-risk category have a separate regulatory route, and we'll say plainly if we're not the right contractor.
Do flats need planning permission for EWI?
Yes. Permitted development rights for external alterations apply to houses, not flats or maisonettes, so an application is needed.
Can one flat have external wall insulation on its own?
Rarely. The outside walls are usually owned by the freeholder, the result would look patchy, and planning is unlikely. Whole-building schemes are the norm.
Do you cover all of Hertfordshire?
Yes. We survey and quote EWI for flats and blocks across Hertfordshire, including Watford, Stevenage, Hemel Hempstead, St Albans, Welwyn Garden City.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.