Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Flats and blocks · Somerset

EWI for flats and blocks in Bath

If you're planning EWI for flats and blocks in Bath, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For blocks in Bath, we start with height, storeys and the planning position, because those decide the system.

  • Free survey in BA1 and nearby
  • Guide price from £110 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bath

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • We work with managing agents on resident communication
  • One programme and one finish across the whole building
  • Cavity barriers and fire-stopping detailed at compartment floors
  • Higher-risk buildings follow the Building Safety Regulator's process in England
A five-storey block of flats half re-clad in white and grey insulated render, with scaffolding on the brick half

Bath: walls, weather and approvals

As well as Bath itself, we quote in Trowbridge, Kingswood and Mangotsfield. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

On mixed-tenure blocks in Bath, we agree access and resident notices with the managing agent before scaffold goes up.

Postcode district
BA1
County or area
Somerset
Nation
England
Nearby
Trowbridge, Kingswood, Mangotsfield, Frome

England: planning and regulations

For a house in Bath, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Who needs to agree to EWI on a block?

The freeholder or management company commissions the work, but leaseholders usually pay through the service charge. In England and Wales, major works above the statutory threshold trigger the Section 20 consultation process before a contract is placed. We provide the specification and pricing you need for that consultation.

EWI for flats and blocks prices in Bath

EWI for flats and blocks guide prices
ItemGuide priceNotes
Mineral wool system on a low-rise block£110–£190 per m²0% VATPriced on survey
Scaffold and accessPriced per buildingIncludes licences where needed
Specification and pricing pack for consultationIncluded with quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Flats and blocks in Bath: questions

Who pays for EWI on a leasehold block?

In England and Wales, usually the leaseholders through the service charge, depending on the lease, and the landlord must follow the Section 20 consultation process for major works.

Can one flat have external wall insulation on its own?

Rarely. The outside walls are usually owned by the freeholder, the result would look patchy, and planning is unlikely. Whole-building schemes are the norm.

Do flats need planning permission for EWI?

Yes. Permitted development rights for external alterations apply to houses, not flats or maisonettes, so an application is needed.

Do you cover Bath?

Yes — we survey and quote EWI for flats and blocks in Bath (BA1) and nearby Trowbridge, Kingswood and Mangotsfield, with a fixed written price before any work starts.

Flats and blocks in Bath

Book a free survey in Bath — no obligation.

Call freeGet a quote