External wall insulation · Aberdeen and Aberdeenshire
External wall insulation in Aberdeen
Homeowners and landlords in Aberdeen can get a free survey and a fixed written quote for external wall insulation, covering AB10 and the surrounding area. We plan EWI in Aberdeen around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in AB10 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Aberdeen
Postcode, service and a phone number is all we need.
Part of every quote
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Work happens outside, so you can live at home throughout
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
What we look for in Aberdeen
Surveys in Aberdeen also cover the surrounding AB10 district and towns such as Inverurie and Peterhead. North East Scotland has granite and stone-built homes, harled cottages and post-war estates, with exposed coastal settings along much of it.
Exposure to wind-driven rain varies across Aberdeen and Aberdeenshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Whole-house jobs and single elevations are both quoted in Aberdeen; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- AB10
- County or area
- Aberdeen and Aberdeenshire
- Nation
- Scotland
- Nearby
- Inverurie, Peterhead, Montrose, Arbroath
Approvals in Scotland
In Scotland, permitted development for external wall changes is narrower, so in Aberdeen we check with the council's planning team where the appearance changes, and always for flats, tenements and conservation areas.
Where a building warrant is needed for Aberdeen work, it's obtained before installation starts, and the quote says who arranges it.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Aberdeen
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
External wall insulation in Aberdeen: questions
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Do you cover Aberdeen?
Yes — we survey and quote external wall insulation in Aberdeen (AB10) and nearby Inverurie, Peterhead and Montrose, with a fixed written price before any work starts.