External wall insulation · Cheshire
External wall insulation in Crewe
We quote external wall insulation for homes in Crewe (CW1) and nearby Winsford and Kidsgrove, with guide prices online and a free survey to fix the price. Whole-house jobs and single elevations are both quoted in Crewe; a cold gable or rear wall can be done on its own where it suits.
- Free survey in CW1 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Crewe
Postcode, service and a phone number is all we need.
Included as standard
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
Crewe: walls, weather and approvals
We also cover Winsford and Kidsgrove, close to Crewe. Crewe sits around 21 miles from Warrington. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Cheshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We plan EWI in Crewe around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Postcode district
- CW1
- County or area
- Cheshire
- Nation
- England
- Nearby
- Winsford, Kidsgrove, Congleton, Newcastle-under-Lyme
Permissions in England
For a house in Crewe, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How does external wall insulation work?
Heat moves out through a wall faster when the wall is solid or poorly insulated. EWI wraps the outside face in a continuous layer of insulation, so the masonry stays on the warm side and the cold bridges at floor and party-wall junctions are reduced. The boards are bonded with adhesive and, on most walls, mechanically fixed. A base coat with an embedded glass-fibre mesh goes over the top, then a primer and the decorative finish.
Because the wall itself sits inside the insulation, it stays warmer and drier, and the rooms keep their full size. That is the main difference from internal insulation.
External wall insulation prices in Crewe
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Crewe: questions
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Does EWI need Building Regulations approval?
In England and Wales, usually. Insulating more than half of a wall's area, or more than a quarter of the building's whole external envelope, counts as renovating a thermal element, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's practical. Scotland and Northern Ireland have their own building standards processes.
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
Do you cover Crewe?
Yes — we survey and quote external wall insulation in Crewe (CW1) and nearby Winsford, Kidsgrove and Congleton, with a fixed written price before any work starts.