External wall insulation · County Antrim
External wall insulation in Newtownabbey
We quote external wall insulation for homes in Newtownabbey (BT36) and nearby Holywood and Belfast, with guide prices online and a free survey to fix the price. We plan EWI in Newtownabbey around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in BT36 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Newtownabbey
Postcode, service and a phone number is all we need.
Part of every quote
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Covers tired brick, pebble dash or failing render with a new finish
What we look for in Newtownabbey
Surveys in Newtownabbey also cover the surrounding BT36 district and towns such as Holywood and Belfast. Newtownabbey is about 4 miles from Belfast. Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Parts of County Antrim fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Whole-house jobs and single elevations are both quoted in Newtownabbey; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- BT36
- County or area
- County Antrim
- Nation
- Northern Ireland
- Nearby
- Holywood, Belfast, Carrickfergus, Castlereagh
Approvals in Northern Ireland
Before quoting in Newtownabbey, we check whether the property is listed or in a conservation area, which changes what needs planning permission in Northern Ireland.
Building control applies to insulation and major re-rendering in Northern Ireland, and the work is signed off by the council.
How does external wall insulation work?
Heat moves out through a wall faster when the wall is solid or poorly insulated. EWI wraps the outside face in a continuous layer of insulation, so the masonry stays on the warm side and the cold bridges at floor and party-wall junctions are reduced. The boards are bonded with adhesive and, on most walls, mechanically fixed. A base coat with an embedded glass-fibre mesh goes over the top, then a primer and the decorative finish.
Because the wall itself sits inside the insulation, it stays warmer and drier, and the rooms keep their full size. That is the main difference from internal insulation.
External wall insulation prices in Newtownabbey
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Newtownabbey: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Do you cover Newtownabbey?
Yes — we survey and quote external wall insulation in Newtownabbey (BT36) and nearby Holywood, Belfast and Carrickfergus, with a fixed written price before any work starts.