External wall insulation · County Down
External wall insulation in Banbridge
Quotes for external wall insulation in Banbridge list the system, the detailing and the VAT position in writing, so you know exactly what's included. We plan EWI in Banbridge around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in BT32 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Banbridge
Postcode, service and a phone number is all we need.
What you get
- Covers tired brick, pebble dash or failing render with a new finish
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
Before we quote in Banbridge
Surveys in Banbridge also cover the surrounding BT32 district and towns such as Craigavon and Lurgan. Banbridge sits around 32 miles from Bangor (County Down). Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Exposure to wind-driven rain varies across County Down: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Whole-house jobs and single elevations are both quoted in Banbridge; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- BT32
- County or area
- County Down
- Nation
- Northern Ireland
- Nearby
- Craigavon, Lurgan, Portadown, Newry
Northern Ireland: planning and regulations
For Banbridge homes, the council's planning office has the final say on external changes; conservation areas, flats and listed buildings need an application or consent.
Building control applies to insulation and major re-rendering in Northern Ireland, and the work is signed off by the council.
How does external wall insulation work?
Heat moves out through a wall faster when the wall is solid or poorly insulated. EWI wraps the outside face in a continuous layer of insulation, so the masonry stays on the warm side and the cold bridges at floor and party-wall junctions are reduced. The boards are bonded with adhesive and, on most walls, mechanically fixed. A base coat with an embedded glass-fibre mesh goes over the top, then a primer and the decorative finish.
Because the wall itself sits inside the insulation, it stays warmer and drier, and the rooms keep their full size. That is the main difference from internal insulation.
External wall insulation prices in Banbridge
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
External wall insulation in Banbridge: questions
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Do you cover Banbridge?
Yes — we survey and quote external wall insulation in Banbridge (BT32) and nearby Craigavon, Lurgan and Portadown, with a fixed written price before any work starts.