External wall insulation · Derbyshire
External wall insulation in Ilkeston
From Ilkeston to Heanor, we price external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. For homes in Ilkeston, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Free survey in DE7 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Ilkeston
Postcode, service and a phone number is all we need.
What the job covers
- Covers tired brick, pebble dash or failing render with a new finish
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Work happens outside, so you can live at home throughout
Ilkeston: walls, weather and approvals
We also cover Heanor and Long Eaton, close to Ilkeston. Ilkeston is about 8 miles from Derby. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Exposure to wind-driven rain varies across Derbyshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We plan EWI in Ilkeston around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Postcode district
- DE7
- County or area
- Derbyshire
- Nation
- England
- Nearby
- Heanor, Long Eaton, Ripley, Hucknall
Permissions in England
For a house in Ilkeston, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Ilkeston
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Ilkeston: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
Do you cover Ilkeston?
Yes — we survey and quote external wall insulation in Ilkeston (DE7) and nearby Heanor, Long Eaton and Ripley, with a fixed written price before any work starts.