External wall insulation · Dyfed
External wall insulation in Ammanford
Looking for external wall insulation in Ammanford? We survey homes across Ammanford and the SA18 area, then give you a fixed written price before any work starts. Whole-house jobs and single elevations are both quoted in Ammanford; a cold gable or rear wall can be done on its own where it suits.
- Free survey in SA18 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Ammanford
Postcode, service and a phone number is all we need.
Included as standard
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Covers tired brick, pebble dash or failing render with a new finish
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
Homes and walls in Ammanford
Surveys in Ammanford also cover the surrounding SA18 district and towns such as Gorseinon and Llanelli. It's roughly 11 miles from Ammanford to Llanelli, the largest town in Dyfed. West Wales has a high share of older solid-walled and stone homes, many in exposed coastal or rural settings.
Parts of Dyfed fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
For homes in Ammanford, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Postcode district
- SA18
- County or area
- Dyfed
- Nation
- Wales
- Nearby
- Gorseinon, Llanelli, Neath, Swansea
Planning and building control in Wales
Householder rules in Wales are similar to England's: in Ammanford, a similar-looking finish on a house is often permitted, but conservation areas, flats and listed buildings need permission or consent.
Building control in Wales applies to most insulation and re-rendering jobs of this size; the quote states who submits the notice.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Ammanford
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
External wall insulation in Ammanford: questions
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Do you cover Ammanford?
Yes — we survey and quote external wall insulation in Ammanford (SA18) and nearby Gorseinon, Llanelli and Neath, with a fixed written price before any work starts.