External wall insulation · Greater London
External wall insulation in Islington
Need external wall insulation in Islington? Tell us about the property and we'll arrange a free survey and a written quote. Whole-house jobs and single elevations are both quoted in Islington; a cold gable or rear wall can be done on its own where it suits.
- Free survey in N1 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Islington
Postcode, service and a phone number is all we need.
Included as standard
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Work happens outside, so you can live at home throughout
- Covers tired brick, pebble dash or failing render with a new finish
Islington: walls, weather and approvals
Surveys in Islington also cover the surrounding N1 district and towns such as Highbury and Holloway. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
We plan EWI in Islington around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Postcode district
- N1
- County or area
- Greater London
- Nation
- England
- Nearby
- Highbury, Holloway, Chalk Farm, Archway
Planning and building control in England
For a house in Islington, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What finish can I have?
Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.
External wall insulation prices in Islington
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Islington: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Do you cover Islington?
Yes — we survey and quote external wall insulation in Islington (N1) and nearby Highbury, Holloway and Chalk Farm, with a fixed written price before any work starts.