Free survey · Fixed written price · UK-wideCall free 0800 088 6248

External wall insulation · Mid Glamorgan

External wall insulation in Maesteg

Looking for external wall insulation in Maesteg? We survey homes across Maesteg and the CF34 area, then give you a fixed written price before any work starts. We plan EWI in Maesteg around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.

  • Free survey in CF34 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Maesteg

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
  • Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
  • Covers tired brick, pebble dash or failing render with a new finish
  • Work happens outside, so you can live at home throughout
Side gable of a semi-detached house part-way through external wall insulation, with mineral wool slabs, mesh base coat and finished white render

Before we quote in Maesteg

We cover Maesteg and nearby Port Talbot, Briton Ferry and Neath. Maesteg sits around 10 miles from Rhondda. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.

Parts of Mid Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

Whole-house jobs and single elevations are both quoted in Maesteg; a cold gable or rear wall can be done on its own where it suits.

Postcode district
CF34
County or area
Mid Glamorgan
Nation
Wales
Nearby
Port Talbot, Briton Ferry, Neath, Bridgend

Planning and building control in Wales

We check Maesteg addresses for conservation areas and listing before quoting, because Welsh permitted development rules don't cover every external change.

Welsh Building Regulations expect walls to be upgraded when a substantial area is renewed, and building control signs the work off.

What finish can I have?

Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.

External wall insulation prices in Maesteg

External wall insulation guide prices
ItemGuide priceNotes
EPS system with silicone render£105–£145 per m²0% VATMost common choice for houses
Mineral wool system£125–£170 per m²0% VATNon-combustible, vapour-open
Brick-slip finish over insulation£185–£260 per m²0% VATWhere a brick look is wanted
Three-bed semi, EPS + silicone (incl. scaffold)£10,200–£17,7000% VAT80–100 m² of wall; depends on detailing and access

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

External wall insulation in Maesteg: questions

Can EWI go over pebble dash?

Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.

How long does external wall insulation last?

A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.

Does EWI need Building Regulations approval?

In England and Wales, usually. Insulating more than half of a wall's area, or more than a quarter of the building's whole external envelope, counts as renovating a thermal element, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's practical. Scotland and Northern Ireland have their own building standards processes.

Do you cover Maesteg?

Yes — we survey and quote external wall insulation in Maesteg (CF34) and nearby Port Talbot, Briton Ferry and Neath, with a fixed written price before any work starts.

External wall insulation in Maesteg

Start with a guide price, then fix it with a free survey in Maesteg.

Call freeGet a quote