Free survey · Fixed written price · UK-wideCall free 0800 088 6248

External wall insulation · Orkney, Shetland and the Western Isles

External wall insulation in Lerwick

Need external wall insulation in Lerwick? Tell us about the property and we'll arrange a free survey and a written quote. We plan EWI in Lerwick around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.

  • Free survey in ZE1
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Lerwick

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
  • Covers tired brick, pebble dash or failing render with a new finish
  • Work happens outside, so you can live at home throughout
  • Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
Side gable of a semi-detached house part-way through external wall insulation, with mineral wool slabs, mesh base coat and finished white render

What we look for in Lerwick

Surveys in Lerwick (ZE1) are arranged around travel to the wider Orkney, Shetland and the Western Isles. The Highlands and Islands have many exposed stone and harled homes, timber-framed houses and scattered rural properties.

Parts of Orkney, Shetland and the Western Isles fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

Whole-house jobs and single elevations are both quoted in Lerwick; a cold gable or rear wall can be done on its own where it suits.

Postcode district
ZE1
County or area
Orkney, Shetland and the Western Isles
Nation
Scotland

Scotland: planning and regulations

For Lerwick properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.

Where a building warrant is needed for Lerwick work, it's obtained before installation starts, and the quote says who arranges it.

How does external wall insulation work?

Heat moves out through a wall faster when the wall is solid or poorly insulated. EWI wraps the outside face in a continuous layer of insulation, so the masonry stays on the warm side and the cold bridges at floor and party-wall junctions are reduced. The boards are bonded with adhesive and, on most walls, mechanically fixed. A base coat with an embedded glass-fibre mesh goes over the top, then a primer and the decorative finish.

Because the wall itself sits inside the insulation, it stays warmer and drier, and the rooms keep their full size. That is the main difference from internal insulation.

External wall insulation prices in Lerwick

External wall insulation guide prices
ItemGuide priceNotes
EPS system with silicone render£105–£145 per m²0% VATMost common choice for houses
Mineral wool system£125–£170 per m²0% VATNon-combustible, vapour-open
Brick-slip finish over insulation£185–£260 per m²0% VATWhere a brick look is wanted
Three-bed semi, EPS + silicone (incl. scaffold)£10,200–£17,7000% VAT80–100 m² of wall; depends on detailing and access

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

External wall insulation in Lerwick: questions

How long does external wall insulation last?

A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.

How much does external wall insulation cost?

Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.

Can EWI go over pebble dash?

Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.

Do you cover Lerwick?

Yes — we survey and quote external wall insulation in Lerwick (ZE1); island and remote addresses are surveyed by arrangement, with a fixed written price before any work starts.

External wall insulation in Lerwick

Start with a guide price, then fix it with a free survey in Lerwick.

Call freeGet a quote