External wall insulation · Shropshire
External wall insulation in Ludlow
Quotes for external wall insulation in Ludlow list the system, the detailing and the VAT position in writing, so you know exactly what's included. Whole-house jobs and single elevations are both quoted in Ludlow; a cold gable or rear wall can be done on its own where it suits.
- Free survey in SY8 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Ludlow
Postcode, service and a phone number is all we need.
What the job covers
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Covers tired brick, pebble dash or failing render with a new finish
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
What we look for in Ludlow
As well as Ludlow itself, we quote in Leominster, Stourport-on-Severn and Kidderminster. It's roughly 24 miles from Ludlow to Telford, the largest town in Shropshire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We plan EWI in Ludlow around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Postcode district
- SY8
- County or area
- Shropshire
- Nation
- England
- Nearby
- Leominster, Stourport-on-Severn, Kidderminster, Hereford
Planning and building control in England
Before quoting in Ludlow, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What finish can I have?
Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.
External wall insulation prices in Ludlow
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
External wall insulation in Ludlow: questions
Does EWI need Building Regulations approval?
In England and Wales, usually. Insulating more than half of a wall's area, or more than a quarter of the building's whole external envelope, counts as renovating a thermal element, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's practical. Scotland and Northern Ireland have their own building standards processes.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Do you cover Ludlow?
Yes — we survey and quote external wall insulation in Ludlow (SY8) and nearby Leominster, Stourport-on-Severn and Kidderminster, with a fixed written price before any work starts.