External wall insulation · Tyne and Wear
External wall insulation in Jarrow
Need external wall insulation in Jarrow? Tell us about the property and we'll arrange a free survey and a written quote. For homes in Jarrow, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Free survey in NE32 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Jarrow
Postcode, service and a phone number is all we need.
Included as standard
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
What we look for in Jarrow
We cover Jarrow and nearby Wallsend, South Shields and North Shields. Jarrow sits around 5 miles from Newcastle upon Tyne. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We plan EWI in Jarrow around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Postcode district
- NE32
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- Wallsend, South Shields, North Shields, Felling
England: planning and regulations
Planning in Jarrow follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What finish can I have?
Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.
External wall insulation prices in Jarrow
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Jarrow: questions
Does EWI need Building Regulations approval?
In England and Wales, usually. Insulating more than half of a wall's area, or more than a quarter of the building's whole external envelope, counts as renovating a thermal element, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's practical. Scotland and Northern Ireland have their own building standards processes.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Do you cover Jarrow?
Yes — we survey and quote external wall insulation in Jarrow (NE32) and nearby Wallsend, South Shields and North Shields, with a fixed written price before any work starts.