External wall insulation · West Yorkshire
External wall insulation in Bingley
We quote external wall insulation for homes in Bingley (BD16) and nearby Keighley and Shipley, with guide prices online and a free survey to fix the price. We plan EWI in Bingley around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in BD16 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Bingley
Postcode, service and a phone number is all we need.
Part of every quote
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Work happens outside, so you can live at home throughout
Before we quote in Bingley
As well as Bingley itself, we quote in Keighley, Shipley and Bradford. It's roughly 12 miles from Bingley to Leeds, the largest town in West Yorkshire. Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across West Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Whole-house jobs and single elevations are both quoted in Bingley; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- BD16
- County or area
- West Yorkshire
- Nation
- England
- Nearby
- Keighley, Shipley, Bradford, Guiseley
Planning and building control in England
Planning in Bingley follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What does the survey check before EWI is specified?
- Wall construction and condition, including any damp, cracking or loose render
- Ground levels and the damp-proof course, so the system starts above splash height
- Eaves depth, verges and whether the roofline needs extending
- Window positions, cill depths and reveal space
- Services on the wall: gas, electric meters, flues, soil pipes, satellite dishes and lights
- Planning and Building Regulations position for your property and nation
External wall insulation prices in Bingley
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Bingley: questions
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
Do you cover Bingley?
Yes — we survey and quote external wall insulation in Bingley (BD16) and nearby Keighley, Shipley and Bradford, with a fixed written price before any work starts.